Menu
Cart 0

Matek F411 Mini SE F4 Flight Controller 20x20mm

Featured Products

SUNLU ASA 3D Printer Filament 1.75mm 1KG

SUNLU ASA 3D Printer Filament 1.75mm 1KG

Rs. 1,500.00 Rs. 2,000.00
iFlight XING2 2306 FPV Motor Unibell 4-6S 1755KV

iFlight XING2 2306 FPV Motor Unibell 4-6S 1755KV

Rs. 1,400.00 Rs. 1,700.00
TBS Crossfire Micro TX V2 Starter Set

TBS Crossfire Micro TX V2 Starter Set

Rs. 8,900.00 Rs. 9,200.00
TBS Crossfire Diversity Nano RX

TBS Crossfire Diversity Nano RX

Rs. 3,900.00 Rs. 4,000.00
Matek M10Q-5883 GPS COMPASS Module

Matek M10Q-5883 GPS COMPASS Module

Rs. 3,200.00 Rs. 3,300.00
DOGCOM 5200mAh 6S 120C 22.2V LiPo Battery QS8 [DG]

DOGCOM 5200mAh 6S 120C 22.2V LiPo Battery QS8 [DG]

Rs. 8,700.00 Rs. 9,900.00

Matek F411 Mini SE F4 Flight Controller 20x20mm 

FC Specifications

  • MCU: 100MHz STM32F411CEU6
  • IMU: MPU6000 (SPI)
  • Baro: BMP280 (I2C)
  • OSD: AT7456E (SPI)
  • Blackbox: No
  • 2x Uarts
  • 2x Softserial-Tx
  • 6x PWM outputs (Dshot/Proshot/oneshot/multishot)
  • 1x I2C
  • 3x ADC (VBAT, Current, RSSI)
  • 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
  • 1x SH1.0_8pin connector (Vbat/G/Curr/R6/S1/S2/S3/S4)
  • TR/SA VTX control: Yes
  • Camera control: Yes
  • WS2812 Led control : Yes
  • Beeper output: Yes
  • RSSI: Yes
  • Filtered Vbat output power for VTX,  Switchable via AUX (modes tab-user1)
  • Convertible 20mm to 30.5mm mounting

Power

  • Input: 6~36V (2~8S LiPo)
  • BEC: 5V 2A cont. (Max.3A)
  • LDO 3.3V: Max.200mA
  • Battery Voltage Sensor: 1:10 (Scale 110)
  • No Current Sensor built-in, supports external current sensor of PDB/4in1

 

FC Firmware

  • INAV Target: MATEKF411SE
  • BF unified Target: MATEKF411SE(MTKS)

 

Physical

  • Mounting
    • 20 x 20mm/Φ3mm with Silicon Grommets
    • 20 x 20mm/Φ2mm with Silicon & Brass Grommets
    • 30.5 x 30.5mm/Φ3mm with Conversion Plate and Silicon Grommets
  • Dimensions:  28 x 28 mm
  • Weight: 5g

 

Including

  • 1x F411-miniSE
  • 1x 20mm to 30.5mm conversion plate
  • 6x Silicon grommets M4 to M3
  • 6x Brass grommets M3 to M2
  • 1x SH1.0_8pin cable 5cm
  • 2x SH1.0_8pin connectors

 

New Arrivals

More New Arrivals ›
RadioMaster Bandit ExpressLRS 915MHz ELRS RF 1W Module TX

RadioMaster Bandit ExpressLRS 915MHz ELRS RF 1W Module TX

Save Rs. 600
SUNLU PETG 3D Printer Filament 1.75mm 1KG

SUNLU PETG 3D Printer Filament 1.75mm 1KG

Save Rs. 200
RadioMaster TX16S Mark II Max Radio Controller Transmitter

RadioMaster TX16S Mark II Max Radio Controller Transmitter

Save Rs. 1,700
RadioMaster Bandit Nano ExpressLRS 915MHz RF ELRS 1W Module TX

RadioMaster Bandit Nano ExpressLRS 915MHz RF ELRS 1W Module TX

Save Rs. 800
ISDT K2 Air Dual Channel Smart Charger 2-6S AC DC 200w 500w 20A

ISDT K2 Air Dual Channel Smart Charger 2-6S AC DC 200w 500w 20A

Save Rs. 2,000
SUNLU ASA 3D Printer Filament 1.75mm 1KG

SUNLU ASA 3D Printer Filament 1.75mm 1KG

Save Rs. 500