iFlight Chimera4 HD LR Sub 250g FPV Drone 4S GPS Caddx Nebula Digital System

  • Rs. 21,200.00



iFlight Chimera4 LR Sub 250g FPV Drone 4S GPS Caddx Nebula Digital HD System PNP


Introducing our first ultra-light LongRange 4inch BNF for every terrain. Newest iFlight SucceX hardware on board coupled with our XING 1404 motors in different kv classes. Slow crusing or speedy action, theres something for every taste. Get flight times above 15min using at least 4S 850mAh packs. Go crazy and strap a Li-On 4S pack on and go even further, depending on capacity and weight!

GPS Rescue ready for easy recovery in case of signal loss, or even if you've been surfing those mountains and suddenly can't find the way back home.. Betaflight OSD pre-setup GPS elements will show you the way!

CaddX Vista with two optional cameras available. Original DJI Vista cam or the lighter and smaller CaddX Nebula.

Outstanding digital FPV experience in 720p directly on your goggles. Custom iFlight 150mm LR antenna for best signal coverage even at long distance.


HIGHLIGHTS:

Sub 250g long-range quad

XING 1404 3000KV(Crusiser) / 3800KV (Speed Cruiser) Ultralight motors

X-Geometry body for high performance handling and max. authority on pitch axis

DC (DeadCat geometry) bottom plate available (additional item, not included, no props in view) 

GPS pre-installed for more safety at distance

SucceX-E mini F4 +35A 4in1 ESC Flystack

Naked GoPro ready

360° TPU protection, Vista cam protection and antenna mounts

Caddx Vista Digital HD System / Caddx Nebula Digital HD System


PRE-TUNED & PRE-SETUP:

Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"

Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!

Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"

GPS Rescue is OFF by default to prevent from unwanted or unexpected drone behaviour.

Please check our linked article on "GPS Rescue Mode // Setup"


FRAME // :Chimera4

Wheelbase: 178mm

Main body dimension: 136.8*114.8mm 

Bottom to top distance: 28mm

Arm thickness: 4mm

Bottom plate thickness: 4mm

Top plate thickness: 2mm

TPU Camera plate thickness: 2mm 

FC: 25.5*25.5mm/20*20mm/16*16mm

FPV Cam: 19mm Micro / 20mm 

 

ELECTRONICS // SucceX-E mini F4 Stack (35A 4-in-1 ESC):

SucceX-E mini F4

MCU: 168MHz STM32F405

Gyro: MPU6000

Blackbox: 8MB

Betaflight OSD: YES

BEC: 5V 2.5A

Uarts: 4

ESC Telemetry: yes

INA Pad: nuart2

Input voltage: 2-6S

Size: 25*25mm /20*20mm φ3 mounting

Weight: 4g

Firmware: BETAFLIGHTF4

Physical

Mounting hole: 20*20mm,φ3mm

Size: 25*25mm

 

NOTE: F.PORT protocol RX input support, telemetry not supported.

 

ESC // SucceX-E mini 35A 

MCU: BB21 F16G

BLHeliS

Capacitance: 470uF/50V

Current Sensor: Yes

Input: 2-6S LIPO

Constant: 35A / Burst: 40A

BEC: No

Supports up to Dshot600, Proshot, Oneshot, Multishot 

Target: G-H-30

Weight: 6.9g

Mounting pattern: 20*20, φ3mm with Grommets φ2mm

Dimensions: 31*30mm (including the power pads)

BNF // Parts list (Build)

Prebuilt and indoor tested Quadcopter

1x Chimera4 frame

1x Caddx Nebula Digital HD System(as your choice)

1x Albatross LHCP ipex 160mm antenna

1setx Nazgul 4030 props (Set of 2 - Color may vary)

1setx Gemfan 4024 Props (Set of 2 - Color may vary)

2x 15*150mm Microfiber PU Leather Battery Strap (Color May Vary)


 

​Note:The camera mount do not included