![DOGCOM 5200mAh 6S 120C 22.2V LiPo Battery QS8 [DG]](http://in.fpvfaster.com/cdn/shop/files/5200mAh120C6S22.2V_300x300.jpg?v=1719899749)
iFlight BLITZ E80 Pro G2 80A 4IN1 BLHeli_32 ESC 35x35/30x30mm
The iFlight BLITZ E80 uses a MOSFET PSMN1R0-40YLD, which can withstand a continuous current of 80A at 25°C, with a maximum power dissipation of 198W. The BEC power supply adopts TI automotive-grade dedicated synchronous rectifier chip, supporting up to 100V. The 1-4 layer power board of the PCB circuit is ultra-thick copper with a thickness of 4OZ, ensuring continuous output under high-power operation. The STM32F051 main control processor with a running frequency of up to 48MHz, combined with a three-in-one driver IC, achieves a faster running speed!
Features
- Rational layout, countersunk holes on extended solder pads to ensure PCB layer connection
- G071 MCU, 48mHz maximum clock speed
- TDK MLCC Low ESR ceramic capacitors
- Top grade PSMN1R0-40YLD MOSFET
- 8 layers double-sided PCB board
Specifications
- Supports DShot DShot150/300/600/MultiShot/ OneShot etc.
- Constant current：80A，100A（Burst）
- Mounting Holes: 35*35mm/Φ3mm
- Current sensor: Yes, scale 200
- Firmware: IFLIGHT_BLITZ_G2
- Telemetry: Supported
- Weight:65g(±10)
- Volts input: 2-8S
- BEC: No
Includes
- 1x iFlight BLITZ E80 Pro G2 80A 4-in-1 BLHeli_32 ESC - 35x35
- 1x 30x30 to 35x35 Mounting Adapter
- 1x Amass XT90E-M Adapter
- 2x UPL 470 50V Capacitors
- 1x XT90 10AWG Connector
- 1x 10AWG Grounding Wire
- 1x iFlight Filter Module V1
- 1x 10AWG Voltage Wire
- 1x FC Connecting Wire
- 1x Hardware Set
