SPEEDYBEE Adapter 2 with Type-C Convertor

Quantity

Featured Products

SUNLU PETG 3D Printer Filament 1.75mm 1KG

RadioMaster Bandit BR3 ExpressLRS 915MHz ELRS TCXO Receiver

RadioMaster TX16S Mark II Max Radio Controller Transmitter

TBS Crossfire Micro TX V2 Starter Set

ISDT K2 Air Dual Channel Smart Charger 2-6S AC DC 200w 500w 20A

Infinity 1400mAh 6S 150C 22.2V LiPo Battery XT60 [DG]

The WiFi chip in the Adapter 2 which greatly improves the transmission speed and makes it possible to upgrade your flight
controllers The whole upgrading process costs only 2-3 minutes.
The firmware flashing currently only supports Betaflight via WiFi connection to the Adapter 2

Now the SpeedyBee Adapter 2 is a full-featured mobile
BF/iNav configurator. Just go to the field to fly without carrying a heavy laptop

Soldering work should be done on the user end on the previous generation. But the Adapter 2 now has built-in XT60 and PH2.0 connectors which both support 1-6S LiPo batteries input*. As the Adapter 2can power your flight controller, you don't need another battery to power your quad.
*For 1S batteries, 3.8V or above is requried. Because some(very few) quadcopters may consume a lot of current, and the output voltage of the adapter 2 will be greatly reduced

Power Input Voltage Range	1-6S(3.8V+ for 1S)
Power Input Interface	XT60-Male, PH2.0 male
Case Meterial	Heat-shrink Tubing
Liquid Silicone Cable Length(Pure Wire)	10cm
Net Weight	21.8g
WiFi Transmission Distance	3 meters
Standby Working Current Under 5V	120mA
Maximum Output Current	200mA @5V
Dimension(Main Body)	1818.542mm